HydroProtector

Previous slide

Next slide

HydroProtector Overview

HydroProtector is a state-of-the-art oil and hydrocarbon separator certified to Class 1 EN 858 standards.
Designed and constructed with FRP (Fibre Reinforced Plastic) for superior durability, corrosion resistance, and longevity.
Full retention system ensuring no untreated liquids bypass the unit.
Features include a flame trap inlet, automatic closure device, and dual-chamber configuration with coalescer filtration.
Treats stormwater flow rates from 2 l/s to 350 l/s, accommodating various site requirements.

HydroProtector systems are autonomous and gravity operated, therefore they will function without electricity. They are engineered to meet the European Standard EN858:1: 2002 and have been independently tested for discharge water quality of less than 5mg/l and also achieve percentage removal rates of nitrogen and phosphorus.

All HydroProtector models are independently certified for hydrocarbon spill capture volumes. Hydraulic out to ensure capacity and flowrate accuracy.

The HydroProtector is a full-retention separator that does not allow any liquids to be bypassed, therefore all flows into the unit are treated. The HydroProtector has an incorporated flame trap, an automatic closure device, and a two-chamber design that protects the coalescer that is fitted at the outlet from inundation in the event of a spill. HydroProtector units are manufactured to treat stormwater flow rates from 2 l/s up to 350 l/s with a maximum pipe size of 750mm.

Why install a HydroProtector

Environmental Protection: Effectively removes hydrocarbons, suspended solids, and other pollutants from stormwater.
Compliance: Certified to meet stringent discharge requirements (<5 mg/L of oil in effluent water) as per EN 858 standards.
Durability: Made from FRP, offering resistance to corrosion, weathering, and degradation, even in harsh environments.
Low Maintenance: Smooth internal surfaces reduce scum accumulation and facilitate easy cleaning.
Cost Efficiency: Lightweight construction minimizes transport and installation costs.

Step One

FLAME TRAP INLET

The inlet pipe features a flame trap which works by eliminating air from the liquids entering the primary chamber.

Step Two

PRIMARY CHAMBER

The primary chamber of the Stormprotector is designed to slow down and separate pollutants from stormwater runoff, allowing dense particles to settle at the bottom of the chamber and the lighter fluids and deris to rise to the surface while the cleaner water flows into the secondary chamber for further treatment.

Step Three

OIL CAPTURE

Captured hydrocarbons rise to the surface of the storage chamber and are retained behind a weir which stops them from flowing into the secondary chamber without resuspension during high flow events.

Step Four

OIL PROBE CONTROL PANEL AND VAPOUR Y-SEAL

The Stormprotector is easily maintained due to its trash, oiland sludge pumpout access, providing easy and efficient access for regular maintenance and cleaning.

Step Five

SLUGE WEIR (OPTIONAL)

The secondary chamber is fitted with a finely perforated coalescing unit which removes the remaining globules of light liquid to a certified 5mg/l. The coalescing unit is installed on guiderails for ease of installation and maintenance.

Step Six

AUTOMATIC CLOSURE DEVICE

The Stormprotector has a max flow bypass that allows water to discharge freely over the weir during large stormwater inflows to prevent flow restriction.

Step Seven

COALESCER FILTER UNIT

The oil probe and control panel are crucial components in monitoring and maintaining oil spills. The probe detects any oil leaks and sends signals to the control panel, which alerts the maintenance team.

Step Eight

INNOVATIVE RISER DESIGN

Product Application

Ideal for stormwater management in:
- Petrol stations: Prevents hydrocarbon discharge into surrounding environments.
- Industrial sites: Handles high-flow stormwater runoff with pollutant containment.
- Shopping centers and parking lots: Manages runoff from large impervious surfaces.
- Fuel distribution centers: Ensures compliance with environmental safety norms.
Customizable to specific site requirements with scalable treatment capacities.

Product Specification

Model ID	Treatment Flow Rate (L/s) )	Spill Capacity (L)	Total capacity (L)	Unit Length (L)	UNIT DEPTH (MM	STANDARD PIPEWORK DIA (MM) )	DRAWING
HYD.2.DC.R2-1	2	343	791	1099	1050	100	Download Files HYD.2.DC.R2-1 Rev. 3_Simplify_1.rvt.log HYD.2.DC.R2-1 Rev. 3.iam HYD.2.DC.R2-1 - Rev.3.pdf Download
HYD.4.DC.R2-1	4	617	1551	2100	1050	150	Download Files HYD.4.DC.R2-1 - Rev 3_Simplify_1.rvt HYD.4.DC.R2-1 - Rev 3.iam HYD.4.DC.R2-1 - Rev 3.pdf Download
HYD.8.DC.R2-1	8	1344	2984	3000	1200	150	Download Files HYD.8.DC.R2-1 - Rev 3_Simplify_1.rvt HYD.8.DC.R2-1 - Rev 3.iam HYD.8.DC.R2-1 - Rev 3.pdf Download
HYD.13.DC.R4-1	13	2436	4896	2370	1500	225	Download Files HYD.13.DC.R4-1 - Rev 3_Simplify_1.rvt HYD.13.DC.R4-1 - Rev 3.iam HYD.13.DC.R4-1 - Rev 3.pdf Download
HYD.15.DC.R4-1	15	2790	5616	3750	1500	225	Download Files HYD.15.DC.R4-1 - Rev 3_Simplify_1.rvt HYD.15.DC.R4-1 - Rev 3.iam HYD.15.DC.R4-1 - Rev 3.pdf Download
HYD.20.DC.R4-1	20	4033	7495	3350	1850	300	Download Files HYD.20.DC.R4-1 - Rev 3_Simplify_1.rvt HYD.20.DC.R4-1 - Rev 3.iam HYD.20.DC.R4-1 - Rev 3.pdf Download
HYD.30.DC.R5-1	30	6006	11,228	5450	1850	300	Download Files HYD.30.DC.R5-1 - Rev 3_Simplify_1.rvt HYD.30.DC.R5-1 - Rev 3.iam HYD.30.DC.R5-1 - Rev 3.pdf Download
HYD.40.DC.R6-1	40	10,008	14,950	7460	1850	300	Download Files HYD.40.DC.R6-1 - Rev 3_Simplify_1.rvt HYD.40.DC.R6-1 - Rev 3.iam HYD.40.DC.R6-1 - Rev 3.pdf Download
HYD.50.DC.R5-2	50	10,031	18,678	8000	1850	300	Download Files HYD.50.DC.R5-2 - Rev 3_Simplify_1.rvt HYD.50.DC.R5-2 - Rev 3.iam HYD.50.DC.R5-2 - Rev 3.pdf Download
HYD.60.DC.R5-2	60	11,923	22,405	9550	1850	300	Download Files HYD.60.DC.R5-2 - Rev 3_Simplify_1.rvt HYD.60.DC.R5-2 - Rev 3.iam HYD.60.DC.R5-2 - Rev 3.pdf Download
HYD.70.DC.R5-2	70	14,951	26,224	7900	2200	300	Download Files HYD.70.DC.R5-2 - Rev 3_Simplify_1.rvt HYD.70.DC.R5-2 - Rev 3.iam HYD.70.DC.R5-2 - Rev 3.pdf Download
HYD.80.DC.R6-2	80	17,022	29,888	8850	2200	300	Download Files HYD.80.DC.R6-2 - Rev 3_Simplify_1.rvt HYD.80.DC.R6-2 - Rev 3.iam HYD.80.DC.R6-2 - Rev 3.pdf Download
HYD.100.DC.R5-3	100	21,262	37,392	11,000	2200	300	Download Files HYD.100.DC.R5-3 - Rev 3_Simplify_1.rvt HYD.100.DC.R5-3 - Rev 3.iam HYD.100.DC.R5-3 - Rev 3.pdf Download
HYD.110.DC.R5-3	110	23,848	41,469	9950	2500	450	Download Files HYD.110.DC.R5-3 - Rev 3_Simplify_1.rvt HYD.110.DC.R5-3 - Rev 3.iam HYD.110.DC.R5-3 - Rev 3.pdf Download
HYD.120.DC.R6-3	120	25,939	45,131	10,800	2500	450	Download Files HYD.120.DC.R6-3 - Rev 3_Simplify_1.rvt HYD.120.DC.R6-3 - Rev 3.iam HYD.120.DC.R6-3 - Rev 3.pdf Download
HYD.150.DC.R5-4	150	32,209	56,116	13,350	2500	450	Download Files HYD.150.DC.R5-4 - Rev 3_Simplify_1.rvt HYD.150.DC.R5-4 - Rev 3.iam HYD.150.DC.R5-4 - Rev 3.pdf Download
HYD.180.DC.R6-4	180	40,983	67,949	11,000	3000	450	Download Files HYD.180.DC.R6-4 - Rev 3_Simplify_1.rvt HYD.180.DC.R6-4 - Rev 3.iam HYD.180.DC.R6-4 - Rev 3.pdf Download
HYD.200.DC.R6-4	200	47,297	76,029	9000	3500	450	Download Files HYD.200.DC.R6-5 - Rev 3_Simplify_1.rvt HYD.200.DC.R6-5 - Rev 3.iam HYD.200.DC.R6-5 - Rev 3.pdf Download
HYD.250.DC.R7-4	250	58,239	93,825	11,000	3500	300	Download Files HYD.250.DC.R7-4 - Rev 3_Simplify_1.rvt HYD.250.DC.R7-4 - Rev 3.iam HYD.250.DC.R7-4 - Rev 3.pdf Download
HYD.300.DC.R7-5	300	69,728	112,511	13,100	3500	750	Download Files HYD.300.DC.R7-5 - Rev 3_Simplify_1.rvt HYD.300.DC.R7-5 - Rev 3.iam HYD.300.DC.R7-5 - Rev 3.pdf Download
HYD.350.DC.R7-5	350	80,943	130,751	15,150	3500	750	Download Files HYD.350.DC.R7-5 - Rev 3_Simplify_1.rvt HYD.350.DC.R7-5 - Rev 3.iam HYD.350.DC.R7-5 - Rev 3.pdf Download

Enquire with us
Today!

Call 1300 585 787

TRAP-IT

ECOPROTECTOR

DRAINSHIELD

BIOPROTECTOR

XTREAMFILTER

ENVIROPROTECTOR

ENVIROSAVE

STORMBRAKE

XTREAMPROTECTOR

HYDROVAULT

HydroProtector Overview

HydroProtector

Why install a HydroProtector

Step One

FLAME TRAP INLET

Step Two

PRIMARY CHAMBER

Step Three

OIL CAPTURE

Step Four

OIL PROBE CONTROL PANEL AND VAPOUR Y-SEAL

Step Five

SLUGE WEIR (OPTIONAL)

Step Six

AUTOMATIC CLOSURE DEVICE

Step Seven

COALESCER FILTER UNIT

Step Eight

INNOVATIVE RISER DESIGN

Product Application

Product Specification

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Download Files

Enquire with us Today!

Southern Highlands 1 Government Road, Braemar, NSW, 2575

Email: sales@protector.com.au

Phone: 1300 585 787

Give us a call or drop by anytime, we endeavour to answer all enquiries within 24 hours on business days.

Call Us

Head Office

Enquire with us
Today!